滑坡对降雨响应的多指标监测及综合预警探析:以赣南罗坳滑坡为例     

李高  谭建民  王世梅  林旭  陈勇  王力  郭飞 《地学前缘》2021,28(6):283-294

降雨量和位移是当前降雨型滑坡监测预警最常用的指标。然而,降雨量和位移监测结果只能反映降雨作用下滑坡的变形情况,不能揭示滑坡内在物理力学性状对降雨的响应。因此,除降雨量和位移监测之外,建立包括体积含水率、基质吸力等反映滑坡动态演化过程的关键指标监测体系必将成为今后更真实地把握滑坡内在演化趋势、更准确地建立滑坡综合预警判据的最有效手段。笔者对赣南地区典型降雨型滑坡进行了多指标监测及综合预警示范研究。结果表明:(1)在降雨条件下滑坡土体内部体积含水率、基质吸力和温度等多指标均产生有规律的动态响应;(2)随着降雨的持续,滑体体积含水率与基质吸力的变化均具有显著的滞后现象;(3)体积含水率和基质吸力变化速率与滑体位移具有显著的正相关性;(4)滑体温度分布变化规律受大气温度和体积含水率的共同影响。以实测数据的滑坡稳定性分析为基准,在考虑实际降雨入渗深度与滑坡稳定性的关联度上,建立了包括日降雨量、体积含水率增加速率、基质吸力减小速率以及位移速度多元指标预警方法体系,提出了基于关键指标综合预警体系及确定方法,旨在为降雨滑坡准确预警提供新模式。  相似文献   

The strain‐dependent spatial evolution of garnet in a high‐P ductile shear zone from the Western Gneiss Region (Norway): a synchrotron X‐ray microtomography study          下载免费PDF全文

A. Macente  F. Fusseis  L. Menegon  X. Xiao  T. John 《Journal of Metamorphic Geology》2017,35(5):565-583

Reaction and deformation microfabrics provide key information to understand the thermodynamic and kinetic controls of tectono‐metamorphic processes, however, they are usually analysed in two dimensions, omitting important information regarding the third spatial dimension. We applied synchrotron‐based X‐ray microtomography to document the evolution of a pristine olivine gabbro into a deformed omphacite–garnet eclogite in four dimensions, where the 4^th dimension is represented by the degree of strain. In the investigated samples, which cover a strain gradient into a shear zone from the Western Gneiss Region (Norway), we focused on the spatial transformation of garnet coronas into elongated garnet clusters with increasing strain. The microtomographic data allowed quantification of garnet volume, shape and spatial arrangement evolution with increasing strain. The microtomographic observations were combined with light microscope and backscatter electron images as well as electron microprobe (EMPA) and electron backscatter diffraction (EBSD) analysis to correlate mineral composition and orientation data with the X‐ray absorption signal of the same mineral grains. With increasing deformation, the garnet volume almost triples. In the low‐strain domain, garnet grains form a well interconnected large garnet aggregate that develops throughout the entire sample. We also observed that garnet coronas in the gabbros never completely encapsulate olivine grains. In the most highly deformed eclogites, the oblate shapes of garnet clusters reflect a deformational origin of the microfabrics. We interpret the aligned garnet aggregates to direct synkinematic fluid flow, and consequently influence the transport of dissolved chemical components. EBSD analyses reveal that garnet shows a near‐random crystal preferred orientation that testifies no evidence for crystal plasticity. There is, however evidence for minor fracturing, neo‐nucleation and overgrowth. Microprobe chemical analysis revealed that garnet compositions progressively equilibrate to eclogite facies, becoming more almandine‐rich. We interpret these observations as pointing to a mechanical disintegration of the garnet coronas during strain localization, and their rearrangement into individual garnet clusters through a combination of garnet coalescence and overgrowth while the rock was deforming.  相似文献   

A multiscale finite element formulation for axisymmetric elastoplasticity with volumetric locking     

Kaiming Xia  Kenn K. Q. Zhang 《国际地质力学数值与分析法杂志》2010,34(10):1076-1100

Similar to plane strain, axisymmetric stress problem is also highly kinematics constrained. Standard displacement‐based finite element exhibits volumetric locking issue in simulating nearly/fully incompressible material or isochoric plasticity under axisymmetric loading conditions, which severely underestimates the deformation and overestimates the bearing capacity for structural/geotechnical engineering problems. The aim of this paper is to apply variational multiscale method to produce a stabilized mixed displacement–pressure formulation, which can effectively alleviate the volumetric locking issue for axisymmetric stress problem. Both nearly incompressible elasticity and isochoric J₂ elastoplasticity are investigated. First‐order 3‐node triangular and 4‐node quadrilateral elements are tested for locking issues. Several representative simulations are provided to demonstrate the performance of the linear elements, which include the convergence study and comparison with closed‐form solutions. A comparative study with pressure Laplacian stabilized formulation is also presented. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

Dynamics of unsaturated poroelastic solids at finite strain     

Ryosuke Uzuoka  Ronaldo I. Borja 《国际地质力学数值与分析法杂志》2012,36(13):1535-1573

We derive the governing equations for the dynamic response of unsaturated poroelastic solids at finite strain. We obtain simplified governing equations from the complete coupled formulation by neglecting the material time derivative of the relative velocities and the advection terms of the pore fluids relative to the solid skeleton, leading to a so‐called u^s ? p^w ? p^a formulation. We impose the weak forms of the momentum and mass balance equations at the current configuration and implement the framework numerically using a mixed finite element formulation. We verify the proposed method through comparison with analytical solutions and experiments of quasi‐static processes. We use a neo‐Hookean hyperelastic constitutive model for the solid matrix and demonstrate, through numerical examples, the impact of large deformation on the dynamic response of unsaturated poroelastic solids under a variety of loading conditions. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

青岛海洋趋磁球菌QH-3 的鞭毛特征     

周克  潘红苗  岳海东  肖天  吴龙飞 《海洋科学》2010,34(12):88-92

趋磁细菌(magnetotactic bacteria,MTB)是一类能够沿着磁力线运动的特殊细菌。MTB在胞内磁小体的导向下借助自身鞭毛进行趋磁趋氧运动,以到达适宜的生境。本研究在青岛潮间带沉积物中发现大量的趋磁球菌,通过光镜与透射电镜对其运动方式与显微结构进行观察。结果显示优势趋磁细菌为卵球形,大小为2.5μm×2.1μm,宽长比为0.85,将其命名为QH-3。QH-3为趋北型(North-seeking)MTB,运动速度88μm/s,细胞内两侧各有一条由棱柱形颗粒组成的磁小体链。QH-3在菌体同一侧有两个由直径62 nm±9 nm的鞘包裹7根鞭毛组成的鞭毛束。这种特殊的鞭毛结构与已报道的致病菌的不同,而与法国地中海趋磁球菌MO-1的相似。  相似文献   

Estimating the crush zone size under a cutting tool in coal     

R. K. Zipf Jr.  Z. T. Bieniawski 《Geotechnical and Geological Engineering》1988,6(4):279-295

Summary As part of an effort to understand the mechanics of fine fragment formation in coal, which is important in studies of respirable dust due to mining, fracture toughness measurements and the strain energy density (SED) theory were applied to calculate the crush zone size under a cutting tool in coal. This zone is the major source of fine fragments in the 1 to 10 µm size range. The model used in these calculations is a boundary element program containing a failure criterion based on the SED theory. The boundary element program calculates linear elastic stresses at numerous points in the coal material ahead of a cutting bit. These stresses are then input to a subroutine called critical flaw length and orientation (CFLO) which uses the SED theory to determine the CFLO for a small crack at the boundary element stress computation point. The extent of crushing is based on earlier postulates about the role of inherent flaws in a fragmentation process. To form 1 to 10 µm fragments requires firstly a local stress strong enough to activate flaws with a characteristic length less than 1 to 10 µm and secondly, a flaw density sufficient to provide an average spacing between flaws also on the order of 1 to 10 µm. The locus of active 10 µm flaws represents the maximum possible extent of fine fragmentation in the 10 µm or less size range assuming that a sufficient inherent flaw density exists. The approach offers a first order approximation to the extent of crushing under a tool tip. The size and shape of the crush zone volume is affected by the attack angle and geometry of the tool.  相似文献   

红砂岩修筑浆砌石坝的岩土工程研究   总被引：9，自引：0，他引：9  

张剑锋  岳国生  黄春耈 《上海国土资源》1989,(2)

红砂岩为中低强度岩层、岩相复杂多变,较易风化、软化。本文通过工程实践阐述了在红砂岩分布地区利用当地材料建造浆砌块石坝的岩土工程研究,开创了红砂岩筑坝的先例。  相似文献   

非线性弹性模型的改进     

俞帆  王铁儒 《岩土力学》1993,14(3):29-40

本文在邓肯-张模型进行深入探讨的基础上,提出了切线模量实质物理意义是剪切模量的观点,并分别采用应力法和应变法推导了剪切模量和体积模量(或变形模量)公式,还进行了考虑Biot固结非线性弹性油罐地基有限元实例分析。对不同的变形模量计算方法进行了比较,提出了改进的非线性弹性模型。  相似文献   

长江三峡仙女山断层带微构造及变形环境探讨   总被引：9，自引：0，他引：9       下载免费PDF全文

吴树仁 《地质科学》1994,29(3):220-227

在宏观变形分析的基础上,重点论述仙女山断层带的微观变形特征。估算了断层带发育过程中两个主要变形阶段的温度、应力和应变速率,探讨了微观变形机制和变形环境。  相似文献   

Long- and middle-term behaviour of the tilt and strain variations in the decade following the 1976 friuli earthquake in NE Italy     

W. J. Mao  P. Santero  M. Zadro 《Pure and Applied Geophysics》1990,132(4):653-677

Tilt and strainmeter data collected in the Friuli seismic area between 1977 and 1985 have been analyzed to study the stress-strain field and/or the elastic parameter variations in the area after the strong 1976 seismic event.We concentrated on three different frequency bands, respectively linked with the tidal waves, the seasonal effect and the secular one. The results from the first two bands point at an increase of the local rigidity modulus.Relevant stresses induced by the seasonal groundwater level variations have been found, thus supporting the hypothesis that they can act as triggering effects. The secular trend reveals significant tectonic stress modifications. It appears that the post-seismic tectonic stresses faded during 1981–1983, and were followed by a new loading phase.On leave from the Institute of Geodesy and Geophysics of the Chinese Academy of Sciences. Ph. D. student at the Institute of Geodesy and Geophysics, Trieste University.  相似文献